Step-by-step on planting a tree.

Planting is not as hard as it might seem, but you will need to invest a little time into the process. There are many people out there that have been forced to repeat the entire process because they did not do it right. When you plant a tree, you are doing a lot of good to the planet. Once you have planted the tree, you will just have to give it minimal attention. There are a number of steps you need to follow when planting trees. Below are the steps you can use when planting trees.

Determine the planting site
This is the first step to take when it comes to planting a tree. You need to choose a suitable location to plant the tree. It should be a little far from your home on street. Trees can grow to the height of power line poles, making it important to plant away for power lines. It is a good idea to call your local utility company to ensure there are no buried pipes or wires in the area.

Select the right tree for your location
There are different types of trees out there, but not all will grow well in the area you want to plant them. It is important to do more research and find trees that do well in the location. There is no need of planting a tree, waiting for it to grow, then realize it is not growing well. Arbor care fort worth will truly take care of all your tree care service needs. Once you find the right tree, learn more about their roots and canopy.

Mark the ground
When marking the ground, use a brightly colored spray paint to mark a circle around the stake. The length to use is two to three times wide in diameter than the root ball. Choose a spray nozzle that will be able to work when the can is in an upside-down position.

Measure the height of the root ball
Put the tree in an upright position and untie the burlap from around the base of the trunk. Carefully remove the soil on the top of the root ball using a garden trowel or cultivator. You should remove enough soil to expose the root flare, where the trunk spreads into individual roots. Take the measurements of the height of the root ball. You should not untie the burlap beyond flare at this point.

Dig the hole
The depth of the hole should be two centimeters shorter than the height of the root ball. It is important for the root ball to be a little longer because the root flare will not be buried. Tree removal fort worth is one of the greatest tree care services in the fort worth local areas. Take a pointed shovel and use it in cutting the grass inside the painted outline. You can remove the grass carefully and transplant it elsewhere or discard it. You should never attempt to use it to backfill the hole. Take a plastic tarp and spread it beside the hole, and not on the grass to make it easier to get back into the hole when needed.

Measure the depth of the hole
Take a shove or shovel and put it into the ground beside the hole and tie a string to the grass level. If needed, dig deeper until you reach the perfect depth. Take the shovel and use it to scrape the bottom of the hole to ensure it is flat. Use superphosphate to dust the hole because it promotes healthy root system. You need to follow the directions in the size of your tree on the packaging.

Fill the empty hole with water to check drainage
Many people jump this step because they don’t see is an important thing to do, but it is. This is why you find people saying they did everything right but the tree died. Fill the hole with water and leave it for 24 hours. If unsure call an arbor care expert to take care of that for you. If it takes more than 24 hours to drain, select another site. A tree will die if its roots are underwater or a long period of time. Since you will be watering regularly, you never have to worry about the hole draining within a short period of time.

Prune the tree if need be
It is a good idea to remove dead, broken, and diseased branches and roots that are crushed or growing around the stem. Be careful not to remove healthy canopies because it slows down root growth and delay establishment. A tree you carefully chose need not be pruned.

Position the tree
Carefully carry or roll the tree into the hole. It is a good idea have a helper help you out. Stand back and view as he/she slowly rotates the tree. Choose the best face and have it face the most prominent direction – typically towards the street.

Prep the root ball
Use metal snips or bolt cutters to remove the wire basket. A helper will prevent damage because they provide a crown when moving the tree. You don’t need to remove the basket or burlap from the bottom of the hole because it can sometimes be hard especially if the tree has a large and heavy root ball.

Backfill the hole
Spread superphosphate and 3-4-3 fertilizer to the soil on the tarp. Follow the instruction provided to get the right amount to use because different trees will have different needs. The size of the tree will also have an effect on the fertilizer needed. Choose the cultivator or rake in scratching the two into the soil. Mix using a shovel and start putting it into the hole. You should avoid burying the root flare. Once the hole is full, add more soil to create a six-inch curb that will be in a crater form. This helps in retaining water. Fill the crater with water and wait for it to be absorbed by the soil before knocking it down and smooth it with a rake.

Water Regularly or Drip-irrigate
Put a three-inch mulch around the tree. The mulch should not be away from the trunk because it can trap moisture that causes rot. Water the tree daily for six weeks to give the roots time needed to establish. Tree removal services will help take care of all your removals for you. You can also get drip irrigation bags.